SUTURES, RIDGES AND LOBES

Ammonitic Suture Detail

Ammonites were predatory, squidlike creatures that lived inside coil-shaped shells.

Like other cephalopods, ammonites had sharp, beak-like jaws inside a ring of squid-like tentacles that extended from their shells. They used these tentacles to snare prey, — plankton, vegetation, fish and crustaceans — similar to the way a squid or octopus hunt today. Catching a fish with your hands is no easy feat, as I'm sure you know. But the ammonites were skilled and successful hunters. They caught their prey while swimming and floating in the water column.

Within their shells, they had a number of chambers, called septa, filled with gas or fluid that were interconnected by a wee air tube. By pushing air in or out, they were able to control their buoyancy in the water column.

They lived in the last chamber of their shells, continuously building new shell material as they grew. As each new chamber was added, the squid-like body of the ammonite would move down to occupy the final outside chamber.

They were a group of extinct marine mollusc animals in the subclass Ammonoidea of the class Cephalopoda. These molluscs, commonly referred to as ammonites, are more closely related to living coleoids — octopuses, squid, and cuttlefish) than they are to shelled nautiloids such as the living Nautilus species.

Ammonites first appeared about 240 million years ago, though they descended from straight-shelled cephalopods called bacrites that date back to the Devonian, about 415 million years ago, and the last species vanished in the Cretaceous–Paleogene extinction event.

Ammonites were prolific breeders that evolved rapidly. If you could cast a fishing line into our ancient seas, it is likely that you would hook an ammonite, not a fish. They were prolific back in the day, living (and sometimes dying) in schools in oceans around the globe.  We find ammonite fossils (and plenty of them) in sedimentary rock from all over the world. In some cases, we find rock beds where we can see evidence of a new species that evolved, lived and died out in such a short time span that we can walk through time, following the course of evolution using ammonites as a window into the past. For this reason, they make excellent index fossils. An index fossil is a species that allows us to link a particular rock formation, layered in time with a particular species or genus found there. Generally, deeper is older, so we use the sedimentary layers rock to match up to specific geologic time periods, rather the way we use tree-rings to date trees.

Ammonites have intricate patterns on their shells called sutures. The different suture patterns tell us what time period the ammonite is from. If they are geometric with numerous undivided lobes and saddles and eight lobes around the conch, we refer to their pattern as goniatitic, a characteristic of Paleozoic ammonites.

If they are ceratitic with lobes that have subdivided tips; giving them a saw-toothed appearance and rounded undivided saddles, they are likely Triassic. If they have lobes and saddles that are fluted, with rounded subdivisions instead of saw-toothed, they are likely Jurassic or Cretaceous.

The Ammonoidea can be divided into six orders:

• Agoniatitida, Lower Devonian - Middle Devonian
• Clymeniida, Upper Devonian
• Goniatitida, Middle Devonian - Upper Permian
• Prolecanitida, Upper Devonian - Upper Triassic
• Ceratitida, Upper Permian - Upper Triassic
• Ammonitida, Lower Jurassic - Upper Cretaceous

In some classifications, these are left as suborders, included in only three orders: Goniatitida, Ceratitida, and Ammonitida. Once you get to know them, ammonites in their various shapes and suturing patterns make it much easier to date a rock formation at a glance.

Their fossil shells are pleasing to the eye, usually taking on a planispiral form— although there are some helically spiralled and fully crazy spiralled forms — known as heteromorphs.

Heteromorphs come in a variety of shapes and sizes. They must have intrigued and mystified those who were first to find them as they do not have an intuitive shape at all for a marine predator.

The beautiful plate you see on the upper left here showing two ammonites is from Sowerby (1837) and is one of the very first scientifically accurate studies of heteromorph ammonites. We see similar species to the heteromorph on the right of the plate in the Nanaimo Group of Vancouver Island, British Columbia.

The beautiful plate to the right shows some of the heteromorph ammonites from Pictet's Paleontology in its second edition (1853-57). Some of the figures are copied from Astier or d'Orbigny works, not included in the first edition.

Ammonite shells have been collected for millennia. During medieval times they were believed to be snakes that had been turned into stone and were sold to people going on pilgrimages. They have been found in archaeological sites in many parts of the world. We find them in archaeological remains spanning human history, across cultures and civilizations.

Ammonites are prized for their scientific and aesthetic value and have been used as building materials, jewellery, amulets, charms to aid in the hunt, religious totems amongst other things. The original discus used by the ancient Greeks in their Olympics was a fossilized ammonite.

A great temple to the god Amon was built at Karnak in Upper Egypt around c. 1785. It is from Amon that we get his cephalopod namesake, the ammonites and also the name origin for the compound ammonia or NH3.

GRAPTOLITES

Graptolites — Graptolita — are colonial animals. The biological affinities of the graptolites have always been debatable. Originally regarded as being related to the hydrozoans, graptolites are now considered to be related to the pterobranchs, a rare group of modern marine animals.

The graptolites are now classed as hemichordates (phylum Hemichordata), a primitive group that probably shares a common ancestry with the vertebrates.

In life, many graptolites appear to have been planktonic, drifting freely on the surface of ancient seas or attached to floating seaweed by means of a slender thread. Some forms of graptolite lived attached to the sea-floor by a root-like base. Graptolite fossils are often found in shales and slates. The deceased planktonic graptolites would sink down to and settle on the seafloor, eventually becoming entombed in the sediment and are thus well preserved.

Graptolite fossils are found flattened along the bedding plane of the rocks in which they occur. They vary in shape, but are most commonly dendritic or branching (such as Dictoyonema), saw-blade like, or "tuning fork" shaped, such as Didymograptus murchisoni.

An excellent resource on graptolites is Old as the Hills. You can find them at:

https://www.asoldasthehills.org/Graptolites.html

GENESIS OF THE ARIETIDAE

Arietidæ plate using heliogravure copper platting

The lovely plate is from the Genesis of the Arietidæ, shared as part of Contributions to Knowledge, 673. pages vii-xi, 1-223; 14 Plates and 35 Woodcuts. Smithsonian, Washington, 1889 by Professor Alpheus Hyatt, an American zoologist and paleontologist.

Hyatt co-founded the American Naturalist, serving as their editor from 1867 to 1870. He became a professor of paleontology and zoology at Massachusetts Institute of Technology in 1870, where he taught for eighteen years, then Professor of Biology and Zoology at Boston University from 1877 until his death in 1902.

Hyatt favoured the use of héliogravure, the technique used here to illustrate some of the best early American ammonite plates. Heliogravure is a type of photogravure or intaglio printmaking or photo-mechanical process whereby a copper plate is grained and then coated with a light-sensitive gelatin tissue exposed to a film positive, then etched.

In France, the correct term for photogravure is héliogravure, while the French term photogravure refers to any photo-based etching technique. The earliest forms of photogravure were developed by two of the original pioneers of photography —  first by Nicéphore Niépce in France in the 1820s, and later Henry Fox Talbot in England.

Niépce was seeking a means to create photographic images on plates that could then be etched and used to make prints on paper with a traditional printing press. Niépce's early images were amongst the first photographs — pre-dating daguerreotypes and the later wet collodion photographic process. Henry Talbot, the inventor of the calotype paper negative process, wanted to make paper prints that would not fade. He worked on his photomechanical process in the 1850s and patented it in 1852 ('photographic engraving') and 1858 ('photoglyphic engraving').

Photogravure in its mature form was developed in 1878 by Czech painter Karel Klíč, who built on Talbot's research. This process, the one still in use today, is called the Talbot-Klič process.

Because of its high quality and richness, photogravure was used for both original fine art prints and for photo-reproduction of works from other media such as paintings. A photogravure is distinguished from rotogravure in that photogravure uses a flat copper plate etched rather deeply and printed by hand, while in rotogravure, as the name implies, a rotary cylinder is only lightly etched, and it is a factory printing process for newspapers, magazines, and packaging.

Many of my favourite paleontological plates were created using this technique. We're fortunate that it allows for both a high degree of detail and multiple printings, ensuring that these beautiful and important early works were not lost in time.

S. S. B. (1890). II.—The Genesis of the Arietidæ. By Professor Alpheus Hyatt. Smithsonian Contributions to Knowledge, 673. 4to. pages vii–xi, 1–223; 14 Plates and 35 Woodcuts. (Washington, 1889.). Geological Magazine, 7(7), 325-326. doi:10.1017/S0016756800186790

Talbot's Correspondence: Biography. De Montfort University.

ANCIENT OCEANS OF EGYPT

Much of Egypt's history is carved in her rock. We think of Egypt as old, with remarkable human history, but the land that formed this part of the world tells us of a much older time in Earth's past.

Egypt, officially the Arab Republic of Egypt, is a country in the northeast corner of Africa, whose territory in the Sinai Peninsula extends beyond the continental boundary with Asia.

Egypt is bordered by the Gaza Strip (Palestinian territories) and Israel to the northeast, the Gulf of Aqaba and the Red Sea to the east, Sudan to the south, Libya to the west, and the Mediterranean Sea to the north. Across the Gulf of Aqaba lies Jordan, across the Red Sea lies Saudi Arabia, and across the Mediterranean Sea lie Greece, Cyprus and Turkey, although none of these share a land border with Egypt.

Five hundred kilometres southwest of Cairo, the flat sabkha plain stretches in all directions covered by a small layer of dark, round pebbles. There are spectacular limestone pillars dotting the landscape of the wonderful karst topography. This land, once the breadbasket of Egypt and the stomping ground of the Pharaohs, is now ruled by pipelines and rusted-out trucks abandoned as wrecks marking the passage of time. Beneath the sand, rust and human history lie some very interesting geology. This rock has been sculpted both through erosion and at the hands of her craftsmen.

Wadi Al-Titan / The Valley of the Whales

The rock here was formed when the Earth's crust was just beginning to cool, 4 to 2.5 billion years ago, during the Archaean. Other rock dates back to the Proterozoic when the Earth's atmosphere was just beginning to form. 

The oldest of these are found as inliers in Egypt’s Western Desert. The rocks making up the Eastern Desert are largely late Proterozoic in age, the time when bacteria and marine algae were the principal forms of life.

Throughout the country, this older basement is overlain by Palaeozoic sedimentary rocks. Cretaceous outcrops are common. We also find sediments that tell a story of repeated marine transgression and regressions, sea levels rising and falling, characteristic of the Cenozoic. It is from Egypt's Cenozoic geology that we get the limestones used for the great pyramids.

The pyramids were built of limestone, granite, basalt, gypsum (mortar), and baked mud bricks. 

Together they form some of the oldest (and last remaining) wonders of the ancient world. The great pyramids of Giza, with their smooth exteriors carved from fine grain white limestone quarried at Tura on the Giza-plateau, are built from Egypt's much older geologic history.

The limestone from Tura was the finest and whitest of all the Egyptian quarries and chosen for the facing stones for the richest tombs. It is interesting in that it is made up almost entirely of Nummulites. 

Nummulites are the calcareous chambered shells (tests) of extinct forms of marine, amoeba-like organisms (protozoans) called foraminifera that accumulated in huge quantities during the early Cenozoic. 

Nummulites Foraminifera Fossil

Foraminifera are still alive in the sea today, though none quite as large as Nummulites. For the central chamber, with the sarcophagus of the pharaoh, lovely reddish-pink granite from Aswan was used. The granite helped to take the weight of this massive construction.

Back in 2013, archaeologists made an unlikely find in a cave seven hundred kilometres from Giza. Their find, a 4,600-year-old papyrus scroll, details an ancient shipload of rock, likely destined for  Khufu's pyramid. 

The papyrus is addressed to Ankh-haf, Khufu’s half-brother, and describes the undertaking of an expedition by a 200-man crew to the limestone quarries near Tura, on the eastern shore of the Nile. After loading the blocks onto their ship, the expedition indented to float down the river Nile for a successful delivery.

The Greek historian Herodotus visited Egypt in the 5th century BC, he described the building of Khufu's pyramid by more than 100,000 slaves. Those slaves then had the unenviable task of unloading the 2-3 ton blocks, then pulling them across ramps to be dragged to the construction site.  It is estimated that 5.5 million tonnes of limestone, 8,000 tonnes of granite (imported from Aswan), and 500,000 tonnes of mortar were used in the construction of the Great Pyramid.